Cupcakes and Sprinkles

Kitchen Aid Cover

This cover is a self made pattern. The center panel is 12 inches wide  by 34 inches and the sides are 10 inches wide by 14 1/4 inches tall. I made notches equal distances from the bottom. The highest notch turned turn out to be 7 9/16 from the center tip. I needed to make a curve to match that same length using the clear flexible ruler. Seam allowance as 1/4 inch.

The original panel was 10 inches wide so I added piping and an additional 3 inch wide strip. The piping gives a little bit of a retro look.

The underside of the flannel is white. I used wide thread for most of the sewing. I matched the color for the hem. I did not want to cross the pink piping with yellow thread so I stopped right before the piping and started again after the piping. I left the threads long so I could pull them to the inside and tack the piped area on the inside. I made a one inch hem. The cover is not lined.